Glass Transition Posted by Genesis Flight Centre October 25th, 2016

LEARN TO GET THE MOST FROM THE SYSTEM

With a rectangular computer display replacing that well-known pack of six round flight instruments, and data presentation that differs considerably from the analog format, it’s no surprise that crews might feel lost, even uncomfortable, flying behind a panel with little resemblance to its former self.

WHAT’S REALLY NEW ABOUT GLASS COCKPITS?

Other than the information they portray, pretty much everything is new: how they work, what drives them, how they share software and display failure modes, and, most significantly, how they actually look.

Pilots transitioning to the glass environment need to have confidence in their understanding of the systems and information.

glass cockpit

KEY COMPONENTS OF GLASS-PANEL TRAINING

SYSTEMS OVERVIEW

Power sources: How the panel receives and uses power, including standby or back-up systems, their capacities and a method to match load to generating limits in any electrical failure

Sensor(s): Failure modes and knowing the impact of failures, which are critical in the event of either a failed Attitude and Heading Reference System (AHARS) or ADAHARS (an AHARS with integral air-data sensing)

Reversionary Modes: Comfort and competency using built-in back-up functions so crew can move data from a failed primary flight display to a functional screen, such as the multifunction display.

Air-Data: Knowledge of the system’s connections, with both main and standby instrument clusters; pitot/static system plumbing gives air-data sensors contact with the atmosphere.

Standby systems: The best stand-by solutions closely resemble the look and function of the main systems they back up, but should run as independently as possible; separate power in the form of a back-up battery is best, compared to one wholly dependent on the main electrical sources.

Flight-Control System architecture: Know whether the autopilot depends on the attitude sensors feeding the PFD, whether the flight-control system employ stand-alone sensors – and how to override a runaway flight-control system.

Programming: Controlling functions such as moving-map displays, alternate screens with traffic or weather, even simply using VHF radios, the GPS or other navigation sensors.

SCENARIO-BASED SIMULATOR TRAINING

Training starts with a VFR cross-country simulation. Learn to program pilot preferences and basic Direct-to navigation. There are many variations of what is displayed on the primary and multifunction displays. Learn how to configure the screens so that what is most important to you is easy to see without much knob turning.

If you are using an autopilot, you will learn to use the Vertical Speed, Flight Level Control, and Vertical NAV functions with Along Track Offset to program altitude changes and the start of your descent.

Engine management pages will get a review. Your instructor will explain the basics of the engine systems information display.

You can optionally get exposure to weather function such as Nexrad. There are many features that can do everything from draw surface maps on the MFD to bringing up METARs at stations along your route.

Finally, just about everything you need to know about your destination airport is a knob turn away, including frequencies, airport diagram, runways information, lighting, and approaches. You will get to know how to quickly access these pages so you feel comfortable in the airplane.

Having completed the ground training, we then take you for one or more flights in the airplane and let you experience the G1000 in flight to solidify the learning.


Glass Transition Training in Toronto, ON